E-100 Waterproof Electrical Cable Wiring Junction Box

• Type: Waterproof Junction Box
• Material: ABS
• IP Rating: IP66
• Certification: ISO, CE, RoHS
• Max.Working Voltage: 254VAC
• Max.Continuous Current: 40A Heat Tracing Circuit
• Model NO.: E-100
• Transport Package: Carton Box
• Specification: E100-E
• Trademark: SN-EA
• Origin: China
• HS Code: 3926909090
• Production Capacity: 100000 Pieces/Month

Product Description

                      E-100 Waterproof electrical cable wiring junction box

    E-100 series end seal kit can be easily discharged. The two types of end seal kits can be used with all heat tracing cables. They can be used at hazardous locations.    E-100-L-E has green LED of very long life span, which can be seen from any direction. Those durable industrial grade electric devices have excellent sealing performances. They can reliably prevent moisture. They can be purchased separately.
     

Model	E-100-E	E-100-L-E
Components	1pc. Of end seal kit  1pc. Of cable strap  1pc. Of lubricant	1pc. Of end seal kit with LED  1pc. Of cable strap 1pc. Of lubricant 2pcs. Of crimp tubes  2pcs. Of PHC crimp tubes
Service location	Hazardous or ordinary (indoor and outdoor)
Max.Operating voltage	254V
Ambient temperature range	-50ºC~+40ºC
Min.Installation temperature	-50ºC
Total height	Approx.171mm	Approx.197mm
Protection level	IP65
Outer diameter	Approx. 46mm. Can be used with 100mm insulating material	Approx. 66mm
Impact resistance	EN50 014, ≥7j
UV protection stability	No degradation after 1000 hours service
Tension elimination	>250N

Parameter for light source of E-100-L-E

Type	Green LED
Rated voltage range	208-230V, 50-60HZ
Power consumption	<2W
Electromagnetic immunity/radiation	Confirm to EN 50 082-2:1995 EN 50081-1:1991
Shock resistance	Confirm to IEC 60068-2-6, 10-150HZ, 20m/s2
Impact resistance	Confirm to IEC 60068-2-6, 50g, 11ms

Tools required:

Steel wire pliers, screw driver, special bade.
 

Accessories required:

Gasket

Adhesive tape

GT-66 for installation temperature higher than 4ºC. GT66

GT-54 for installation temperature higher than -40ºC. GT54

 

Note:

1. This component is an electric device. It should be properly installed. Measures should be taken for fire protection.

2. Leakage protection device shall be installed to prevent fire as may happen due to damage or improper installation of heat tracing cables.

3. Only those parts and components approved according to our criteria can be used. Please don't use substitutes or PVC insulation tapes.

4. As the black conductive plastics is a conductor, it should strictly insulated and kept dry. Short circuit should be prevented.

5. In peeling the insulation layer or conductive plastics, please keep the bus wire intact as any damage of bus wire may lead to overheating or short circuit.

6. To prevent short circuit, bus wire shall never be contact with each other.